Reset the OID - Intelliprint Series

Issue / Symptom:  

The Operational ID signature contains the printer device information. If this string is corrupted, it will cause a SERVICE ERROR 01.

Notes:

• Starting with the Product Versions listed bleow, the OID is set directly by the flash code.
• The OID need only be reset once. If one reset does not resolve the issue, then there is another problem.

The OID can be restored by

• Turn off the printer power.
• Press and hold the following keys:
   

  Model	Applies to	Key sequence
  TallyGenicom Intelliprint 9035	none
  GENICOM cL160	Product Version less than 3.00	START | CANCEL | NEXT
  GENICOM mL450, mL401+	Product Version less than 1.95	START | CANCEL | NEXT
  GENICOM LN45	Product Version less than 1.95	START | CANCEL | PREVIOUS
  GENICOM mL260, mL280+	Product Version less than 5.5	START | STATUS | NEXT
  GENICOM mL320, mL401,	all	START | CANCEL | NEXT
  GENICOM LNM40	all	START | CANCEL | PREVIOUS
  GENICOM mL210, mL280	all	START | STATUS | NEXT
  GENICOM LN21, LN28	all	START | STATUS | PREVIOUS
  Compaq LN32, LNM40	all	START | CANCEL | SELECT
  Compaq LN21, LN28	all	START | STATUS | SELECT

• Turn on the printer power.
• The display shows GENICOM SELECTED or COMPAQ SELECTED- release the keys.
• Press START.