|
Resolution:
Occasionally a user will set a root password on the PrintNet
adapter and then forget it. This is the procedure to reset the
root password back to default (no password).
1. Turn the printer OFF.
2. On the PrintNet adapter, flip dip switch 2
down.
3. Turn the printer ON, and wait about 1 minute
for the adapter to boot.
4. Telnet to the adapter.
5. Login as root and press [enter] for the
password.
6. Flip dip switch 2 up.
7. At the telnet prompt type;
set user passwd root
save
reset
8. Wait about 1 minute for the adapter to reboot
after the reset command.
9. Turn the printer off, wait a few moments, and
turn the printer back on. Wait about 1 minute for the adapter to
boot.
10. At this point you should be able to telnet
back into the adapter, logging in as root with no password
(enter key). |
